Epc 2170-0498 final.p65

Specification Sheet
CP-2170-0498
AMETEK
EPC 2000® Electronic
Pressure Calibrator
❑ +0.05% Accuracy of Reading Traceable to NIST
❑ UL and c-UL Division 1, Class 1, Group C,D and
CENELEC EEx ib IIB T3 (179°C) Instrinsic Safety
Approved, CE Mark Compliant
❑ Modular, Interchangeable Pressure Ranges up to
2,000 psi (135 bar )
❑ Current, Voltage & Pressure Switch Test Inputs
❑ 5-Digit Floating Point Readout
❑ Displays in English, Metric or S.I. Units
❑ Displays mA Converted to Pressure Range and
Percent Difference
❑ Displays information in English, Spanish, French,
German or Italian
PRODUCT DESCRIPTION
The EPC 2000 Electronic Pressure Calibrator combines the In addition to handling pressure inputs, the instrument also mea- accuracy of a laboratory instrument with the functionality and sures voltage and current and can perform switch tests. The portability of a field calibrator. The EPC 2000 Calibrator is current input interfaces with current-output transmitters and will used to calibrate pressure measuring instruments with an ac- accept 0-50mA inputs. This can be displayed in mA, mA com- curacy of +0.05% of indicated reading for readings from 20- bined with a percentage of range such as 4-20mA, or mA con- 100% of full scale. The EPC 2000 Calibrator is accurate to verted to a pressure value in a user-defined range combined with +0.025% of full scale at or below 20% of full scale.
a percent difference between this value and the measured pres-sure. This features allows for verification of the accuracy of the The EPC 2000 Calibrator is ideal for difficult applications such transmitter without having to perform any manual calculations.
as custody transfer stations, critical process control applica-tions and virtually any application that requires near dead- The voltage input interfaces with voltage-output transmitters. It also features a general purpose voltmeter capable of han-dling inputs from 0-50VDC. Readings are displayed in the same The EPC 2000 Calibrator features a large, easy-to-read, mul- format as current. The voltage and current switch test input is tifunction LCD Display. The display indicates measurements useful when working with pressure switches. It freezes and dis- in a 5-digit floating point format in any common English, Metric or plays the input pressure when the switch trips “open” S.I. units of measure. The unit automatically verifies transmitter accuracy without manual calculations. The EPC 2000 also dis-plays mA converted to a pressure range and percent difference The EPC 2000 Calibrator is battery operated using two 9V between the displayed value and the measured pressure. The Alkaline or Lithium batteries. An optional NiCd rechargeable bat- unit makes calibration simple and straightforward with extensive tery pack is available. The unit also features a nonvolatile memory prompts which guide the user through the calibration process.
and an automatic shutdown feature that helps extend battery life.
The unit can also display information in English, Spanish, French,German or Italian. The two-line alphanumeric display indicates The EPC 2000 Calibrator is UL and c-UL Division 1, Class 1, pressure on the top line. Current, voltage or switch test is dis- Group C,D and CENELEC EEx ib IIB T3 (179°C) instrinsically played on the bottom line. The display indicates overpressure conditions for the transducer selected.
The EPC 2000 Calibrator features modular and interchange-able pressure modules so that one unit satisfies the needs ofmany different pressure ranges. Transducer modules may havedual or single ranges. The transducers are available in rangesfrom 100 inH O up to 2000 psi.
CALIBRATION INSTRUMENTS
FUNCTIONAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Pressure
Operating Temperature
Storage Temperature
Battery Types
Two 9V UL-approved Lithium Batteries (standard)
Units of Measure . psi, Torr, atm, kPa, mPa, mbar, Battery Life
Standard 9V Lithium . 4 hours at 25oC typical Battery Charging Times (Approximate)
Media Compatibility . Any media compatible with 230VAC Wall (Euro Two Prong) Charger . 6 hours 120VAC Wall Adapter/12VDC Auto Charger . 1.5 hours Format Options . mA, mA to %, mA to pressureConnections . Standard banana jack, Shipping Weights (appox.)
Format Options . V, V to %, V to pressure Switch Test
Warranty
EPC 2000 Electronic Pressure Calibrator Showing
EPC 2000 Pressure Calibrator Kit complete with
Removeable Transducer Modules
Hand Pumps and Accessories
ORDERING INFORMATION
EPC 2000 ELECTRONIC PRESSURE CALIBRATOR
Order Number
Description
Base Number - 1st thru 6th characters
EPC 2000 Electronic Calibrator complete (Transducer and Display Modules) and Flexible Case Base Number when ordering Kits - 1st thru 6th characters
EPC 2000 Calibrator complete with Model T-622 (T-620 with 0-2000 psi Gauge) and Model T-810 Hand Pumps,two (2) 0.25-inch NPTF “T” fittings, two (2) 0.25-inch Quick Disconnect fittings, 0.25 x 0.125-inch Union fitting,test leads, 9VDC Lithium batteries, NIST Traceable Certificate, carrying case and instruction manual.
EPC 2000 Calibrator complete with Model T-622 (T-620 with 0-2000 psi Gauge) andModel T-731 (T-730 with 0-300 inH O Gauge) Hand Pumps, two (2) 0.25-inch NPTF “T” fittings, two (2) 0.25-inch Quick Disconnect fittings, test leads, 9VDC Lithium batteries, NIST Traceable Certificate,carrying case and instruction manual.
EPC 2000 Calibrator complete with Model T-730 Hand Pump, two (2) 0.25-inch NPTF “T” fittings, two (2)0.25-inch Quick Disconnect fittings, test leads, 9VDC Lithium batteries, NIST Traceable Certificate, carryingcase and instruction manual.
EPC 2000 Calibrator complete, test leads, 9VDC Lithium batteries, NIST Traceable Certificate, carrying caseand instruction manual. Note: Carrying Case can accommodate up to 2 AMETEK Hand Pumps.
Transducer Module Ranges - 7th and 8th characters
No Transducer Range (Specify when ordering only EPC-3-) 0 - 100 inH O and 0 - 280 inH O Dual Range 0 - 280 inH O and 0 - 1000 psi Dual Range 0 - 280 inH O and 0 - 2000 psi Dual Range NIST Certification Data- 9th and 10th characters
NIST Traceable Certificate of Calibration, standard with all EPC Units
For optional NIST Traceable Calibration Data Supplied add “/C” Sample Order Number
EPC-B- 46
EPC 2000 Calibrator with 0-500 PSI and 0-2000 PSI transducers complete with T-622 and T-731 Hand two (2) 0.25-inch NPTF “T” fittings, two (2) 0.25-inch Quick Disconnect fittings, test leads, BATTERY OPTIONS (Ordered Separately)
Order Number
Description
Rechargeable NiCd Battery Pack (Used to replace two standard 9V batteries) 9VDC Lithium Battery (Two required for operation) 12VDC Automotive Charger with 120VAC Wall Adapter DIMENSIONAL DRAWINGS
HAND PUMP DESCRIPTIONS
(See AMETEK catalog for additional details and models.)
Description
Description
Pneumatic pressure tester includes extended range Hydraulic pressure tester with transparent, 1-pint vernier adjustment for fine pressure control. Range reservoir for easy viewing. Includes a vernier adjustment for fine pressure control and needle Same as Model T-730 with 0-300 inH O test gauge.
Same as T-620 Tester. Includes 0-1000 psi Gauge.
Pneumatic pressure tester generates pressure up to Same as T-620 Tester. Includes 0-2000 psi Gauge.
200 psi. Includes vernier adjustment and thumb-screw bleed valve for rapid or gradual venting.
AMETEK is a leading global manufacturer of electrical and electromechanical products for nichemarkets. Listed on the New York Stock Exchange (AME) since 1930, AMETEK’s annual sales are TEST AND CALIBRATION INSTRUMENTS
approaching $1billion. Operations are in North America, Europe and Asia, with about one-third ofsales to markets outside the United States.
Headquarters
AMETEK Denmark A/S
AMETEK Precision
AMETEK Singapore Pvt. Ltd.
Instruments Europe GmbH
Information within this document is subject to change without
Manufacturer
AMETEK, CHATILLON and EPC 2000 are registered trademarks of AMETEK, Inc.

Source: http://www.ingcapino.com.ar/productos/archivos-pdf/ametek/presion/epc.pdf